Table of Contents
Advertisement
OpERATing inSTRuCTiOnS
Read the EnTiRE impORTAnT
SAFETY inFORmATiOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Work piece and Work Area Set up
1.
Designate a work area that is clean
and well-lit. The work area must not
allow access by children or pets to
prevent injury and distraction.
2.
Secure loose work pieces using a
vise or clamps (not included) to pre-
vent movement while working.
3.
There must not be hazardous ob-
jects, such as utility lines or foreign
objects, nearby that will present a
hazard while working.
gEnERAL OpERATing
inSTRuCTiOnS
Grip the tool firmly in both
hands.
Grinder
Figure 10
1.
Install the charged Battery onto the
Grinder - See Figure 10.
SKU 66672
TO pREVEnT
SERiOuS injuRY:
Battery
Button
For technical questions, please call 1-800-444-3353.
2.
Depress the Switch (28) to start the
Grinder.
3.
Allow the tool to come up to full
speed before touching the work ma-
terial.
4.
Apply the wheel to the work mate-
rial, allowing the tool to operate at
full speed. If the tool bogs down, use
lighter pressure.
5.
To create a smoother surface, keep
the tool moving over the work sur-
face.
6.
Release the Switch to stop the tool.
7.
Allow the tool to come to a complete
stop before setting it down.
8.
To prevent accidents, turn off the tool
and disconnect its power supply after
use. Clean, then store the tool in-
doors out of reach of children
Page 15
Advertisement
Table of Contents
