Chicago Electric 98107 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Grinder
  5. 98107
  6. Set up and operating instructions manual

Chicago Electric 98107 Set Up And Operating Instructions Manual

Magnesium 4-1/2” angle grinder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MagnesiuM 4-1/2" angle
set up and Operating instructiOns
distributed exclusively by Harbor Freight tools
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
saVe tHis Manual.
©
Copyright
2008 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements,
actual product may differ slightly from the product described herein.
For technical questions or replacement parts, please call 1-800-444-3353.
REV 11h
grinder
3491 Mission Oaks Blvd., Camarillo, CA 93011
®
. All rights reserved. No portion of this manual or any artwork
98107
®
.

Advertisement

Table of Contents
loading

Related Manuals for Chicago Electric 98107

Summary of Contents for Chicago Electric 98107

  • Page 1 Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. For technical questions or replacement parts, please call 1-800-444-3353. REV 11h grinder 98107 ® . All rights reserved. No portion of this manual or any artwork ®...

  • Page 2: Table Of Contents

    OF cOntents ... 12 instructiOns FOr putting intO use ... 12 asseMBlY...12 FunctiOns ... 13 reV 09f SKU 98107 For technical questions, please call 1-800-444-3353. Operating instructiOns ... 13 tOOl set up ... 13 wOrK piece and wOrK area set up ...15 general Operating instructiOns ...

  • Page 3: Important Safety Information

    SKU 98107 For technical questions, please call 1-800-444-3353. nOtice is used to address practices not related to personal injury. cautiOn, without...
  • Page 4 SKU 98107 For technical questions, please call 1-800-444-3353. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropri- ate conditions will reduce personal injuries.

  • Page 5: Grinding, Sanding Or Wire Brushing Operation Safety Warnings

    Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. SKU 98107 For technical questions, please call 1-800-444-3353. use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
  • Page 6 SKU 98107 For technical questions, please call 1-800-444-3353. sive or work piece fragments. the eye protection must be capable of stopping flying debris generated by various operations.
  • Page 7 Electromagnetic fields in close prox- imity to heart pacemaker could cause pacemaker interference or pacemak- er failure. In addition, people with SKU 98107 For technical questions, please call 1-800-444-3353. pacemakers should: • Avoid operating alone. • Do not use with power switch locked •...

  • Page 8: Kickback And Related Warnings

    The opera- tor can control torque reactions or kickback forces, if proper precautions are taken. SKU 98107 For technical questions, please call 1-800-444-3353. never place your hand near the rotating accessory. Accessory may kickback over your hand.

  • Page 9: Safety Warnings Specific For Sanding Operations

    SKU 98107 For technical questions, please call 1-800-444-3353. wheel or brush with the guard. Wire wheel or brush may expand in diameter due to work load and cen- trifugal forces.

  • Page 10: Grounding

    SKU 98107 For technical questions, please call 1-800-444-3353. double insulated tools: tools with two prong plugs Tools marked “Double Insulated” do not require grounding.

  • Page 11: Symbology

    Protect the extension cords from sharp objects, excessive heat, and damp or wet areas. SKU 98107 For technical questions, please call 1-800-444-3353. recOMMended MiniMuM wire gauge FOr extensiOn cOrds* (120/240 VOlt)

  • Page 12: Specifications

    SKU 98107 For technical questions, please call 1-800-444-3353. FrOM accidental OperatiOn: turn the power switch of the tool to its “OFF”...

  • Page 13: Functions

    Alloy Cover Auxiliary Handle (27) This hand-held tool may be used for grinding, sanding, scaling, and other related operations. SKU 98107 For technical questions, please call 1-800-444-3353. Operating instructiOns read the entire iMpOrtant saFetY inFOrMatiOn section at the beginning of this...
  • Page 14 Inner Flange. warning: to prevent serious injury, blotters must be used for all grinding wheels they are provided SKU 98107 For technical questions, please call 1-800-444-3353. with. Blotters help prevent grind- ing wheel damage and wheel slip- page, causes of wheel failure.

  • Page 15: Work Piece And Work Area Set Up

    Before beginning work, provide for sparks and debris that will fly off the work surface. reV 09f SKU 98107 For technical questions, please call 1-800-444-3353. general Operating instructions tO preVent seriOus injurY: Grip the tool firmly in both hands.

  • Page 16: Maintenance And Servicing

    Always wear safety glasses when performing this mainte- nance operation. SKU 98107 For technical questions, please call 1-800-444-3353. aFter use, of the tool with clean cloth. Never use solvents or harsh cleaners as they may damage the housing.

  • Page 17: Troubleshooting

    Follow all safety precautions whenever diagnosing or servicing the tool. disconnect power supply before service. SKU 98107 For technical questions, please call 1-800-444-3353. the carbon brushes contact the mo- tor armature, and that the indented portions of the brushes are posi- tioned where the springs contact.

  • Page 18: Parts List

    BUyER ASSUMES ALL RISk AND LIABILITy ARISING OUT Of HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT Of HIS OR HER INSTALLATION Of REPLACEMENT PARTS THERETO. SKU 98107 For technical questions, please call 1-800-444-3353. parts list Qty.

  • Page 19: Assembly Diagram

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 98107 For technical questions, please call 1-800-444-3353. Page 19...

  • Page 20: Limited 1 Year Warranty

    This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 REV 11h SKU 98107 For technical questions, please call 1-800-444-3353. Page 20...

Table of Contents