Specifications; Instructions For Putting Into Use - Chicago Electric 65519 Set Up And Operating Instructions Manual

SpeciFicAtiOnS

Electrical Requirements
Motor No Load Speed
Wheel Size
Spindle Arbor Diameter
Spindle Thread
unpAcKing
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
inStructiOnS FOr
putting intO uSe
read the entire iMpOrtAnt
SAFetY inFOrMAtiOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
FrOM AccidentAl
OperAtiOn:
turn the power Switch of the
tool to its "OFF" position and
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
note: For additional information regarding
the parts listed in the following pages,
SKU 65519
120 V~ / 60 Hz / 6 A
10,000 RPM
4-1/2" Diameter x 1/4"
Thick
5/8"
11 TPI
224184
tO preVent
SeriOuS injurY
For technical questions, please call 1-800-444-3353.
refer to the Assembly Diagram near
the end of this manual.
Assembly
installing the Auxiliary handle
handle (51)
attachment points
Spindle lock (1)
1. The Handle (51) can be installed in
three different positions; on top, or on
either side of the Gear Box (3).
2. Screw the threaded end of the Han-
dle into the selected position. Tighten
securely before beginning work.
guard adjustment
3. Depending on where the Handle is
mounted, the Guard may have to
be moved. Adjust the Guard (15) to
the proper position for the intended
operation before installing a grinding
wheel or other disc.
Loosen the screws in the collar of
4.
the Guard and rotate to the position
desired, see next picture.
Page 11