Instructions For Putting Into Use - Chicago Electric 65519 Owner's Manual & Safety Instructions

INSTRUCTIONS FOR PUTTING
INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including all
text under subheadings therein before
set up or use of this product.
ACCIDENTAL OPERATION:
Turn the Power Switch of the tool to
its "OFF" position and unplug the
tool from its electrical outlet before
assembling or making any
adjustments to the tool.
Note: For additional information regarding the
parts listed in the following pages, refer to
the Assembly Diagram near the end of this
manual.
Assembly
Installing the Auxiliary Handle
attachment points
Spindle Lock (1)
1. The Handle (51) can be installed in three
different positions; on top, or on either side
of the Gear Box (3).
2. Screw the threaded end of the Handle into
the selected position. Tighten securely
before beginning work.
Page 10
TO PREVENT SERIOUS
INJURY FROM
Handle (51)
For technical questions, please call 1-888-866-5797.
Guard adjustment
3. Depending on where the Handle is
mounted, the Guard may have to be moved.
Adjust the Guard (15) to the proper position
for the intended operation before installing a
grinding wheel or other disc.
4. Loosen the screws in the collar of the Guard
and rotate to the position desired, see next
picture.
Loosen these
screws to
rotate Guard
Inner Flange (18)
Outer Flange (20)
Guard (15)
Item 65519