Assembly Instructions - Chicago Electric 94071 Assembly And Operating Instructions Manual

FIGURE D
When unpacking, check to make sure all the parts shown on the Parts List on page 14
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
1. WARNING! Make sure the Power Switch (7) of the Grinder is in its
"OFF" position and its Power Cord/Plug (13) is unplugged from the
electrical outlet prior to performing any assembly.
To Attach The Right Moveable Tool Rest:
The left Moveable Tool Rest (5) has been pre-attached by the manufacturer.
1.
However, the right Moveable Tool Rest (5) must be attached by the operator prior
to using the Grinder. (See Figure E, next page.)
2. To attach the right Moveable Tool Rest (5), insert its mounting slot onto the
protruding, threaded, Bolt located on the front of the Grinder. Then, secure the
Moveable Tool Rest, using the Wing Nut (6). IMPORTANT: Make sure to adjust
the distance between the Moveable Tool Rest and Grinding Wheel (40)
to a 1/16" or less separation. (See Figure E.)
SKU 94071 For technical questions, please call 1-800-444-3353
SYMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
V ~
Volts Alternating Current
A
Amperes
n o
No Load Revolutions
xxxx/min.
per Minute (RPM)
UNPACKING

ASSEMBLY INSTRUCTIONS

PAGE 10