Adjusting The Meat Drawer Temperature - Whirlpool Side by side Refrigerator/Freezer Use & Care Manual

To replace the shelf track, guide the track hooks
into the shelf support slots on the back wall.
NOTE: Make sure that both sets of track hooks
are in the slots and that the slots are parallel with
each other.
Then push the track back and down securely into
the shelf supports.
To reinstall the shelf, hold the shelf at the front
and tip the front at a 45" angle to the track. Insert
both of the rear shelf slides into the upper channel
of the track and lower the front into place.
NOTE: Make sure that both of the rear shelf
slides are securely in the track before letting go
of the shelf.
ADJUSTING
ME U-TRACK* REFRIGERATOR SHELF
(CONT.)
ADIUSIINC
ME MEAT DRAWERTEMPERATURE
The meat drawer is cooled from cold air that flows To adjust the temperature, slide the control from
in from the freezer
side to side to let more or less cold air into the meat
compartment through
drawer. Set the control toward Cold for a slightly
a vent in the wall of cooler temperature, or toward Colder for a much
the refrigerator (See cooler temperature.
"Ensuring Proper Air
Circulation" vent C on
NOTE: Putting the control on the coldest setting
page 15.) This helps to
may cause freezing or ice crystals, depending on
keep the meat drawer
the items you have in the meat drawer.
colder than the rest of
the refrigerator for
. better storage of meats.
19