Adjusting The Spillguard Refrigerator Shelves; Removing The Meat Drawer And Cover - Whirlpool Side by side Refrigerator/Freezer Use & Care Manual

~DIUS~NC ME SPIUCUARD* REFRIGERATOR SHELVES
The shelves in your refrigerator are adjustable to
match the way you use them. Glass shelves are
strong enough to hold bottles, milk, and other heavy
food items.
To remove a shelf, first remove all items from the
shelf. Then tilt up the front of the shelf and lift it at
the back. Pull the shelf straight out.
To replace a shelf, guide the rear shelf hooks into
the slots of the shelf supports on the back liner of
the refrigerator. Tilt the front of the shelf up until the
rear hooks drop into the slots and then lower the
front of the shelf into position.
To slide shelf out:
l
Carefully pull front of shelf toward you.
To slide shelf in:
l
Push shelf in until it stops.
To remove the cover:
0 Remove the meat drawer and the crisper.
0 Lift the front of the cover off of the supports and
remove it by pulling up and out.
To remove the meat drawer:
l
Slide the meat drawer straight out to the stop.
l
Lift the front slightly and slide it out the rest of
the way.
0 Replace in the reverse order.
REMOVING THE MEAT DRAWER AND COVER
To replace the cover:
0 Fit the back of the cover into the notch
supports on the walls of the refrigerator and
lower it into place.
0 Replace the meat drawer and crisper.