Removing The Meat Drawer And Cover; Adjusting The Meat Drawer Temperature - Whirlpool ED27DQXDW01 Use And Care Manual

To reinstall shelf:
1. Hold shelf at front and back,
2. Tilt front of shelf up to a 45 ° angle to track,
3. Insert both rear shelf slides into upper channel
of track.
4. Lower front of shelf to a level position.
NOTE: Make sure both rear shelf slides are securely
in the track before letting go of shelf.
Insert rear shelf
slldes Into
upper channel
of track.
Upper channel
of track
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide meat drawer straight out to the stop.
2. Lift the front slightly,
3. Slide out the rest of the way,
4. Replace in reverse order.
To remove the cover:
1. Remove meat drawer and crisper.
2. Lift front of cover off supports.
3. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator.
2. Lower front into place.
3, Replace meat drawer and crisper,
Pull out to the stop, lift the front,
and pull again.
Adjusting the meat drawer temperature
Cold air from the freezer flows into the meat drawer.
.,,=_.-.1= A
This helps keep the meat drawer colder than the rest of
<1=_.,(
the refrigerator for better storage of meats, fr__....{(_;_
Slide the control from side to side to let more or less
cold air through.
Use the control to
adjust the temperature
of the meat drawer.
11