Ensuring Proper Air Circulation; Removing The Snap-On Door Trivet - Whirlpool Side by side Refrigerator/Freezer Use & Care Manual

To ensure proper temperatures, you need to permit
airflow between the two sections. As shown in the
illustration, cold air enters the bottom of the freezer
section (A) and moves up. It then enters the fresh
food section through the top vent (B). Air returns to
the freezer through the vent at (D).
Do not block any of these vents with food
such as soda, cereal, bread, etc. If the vents
are blocked, air flow will be prevented and the
temperature controls will not function properly.
To adjust the air control vent C, see "Adjusting the
Meat Drawer Temperature" on page 19.
IMPORTANT: Because air circulates between both
sections, any odors formed in one section will
transfer to the other. You must thoroughly clean
both sections to eliminate odors. To prevent odor
transfer from food, wrap or cover foods tightly.
ENSURING
PROPER AIR CIRCULATION
I
/
The door trivets may be removed for easier clean- To replace the trivet, line up the ends of the trivet
REMOVING THE SNAP=ON DOOR TRIVET
(ON SOME MODELS)
ing. To remove the
trivet, first remove all
items from the shelf.
Then push in slightly
and pull out on each
side of the inside tab
and lift the trivet
straight out.
with the buttons on the
sides of the door liner.
Push the trivet straight
back until it snaps
into place.
15