Exterior Moisture Contiol; Adjusting Meat Drawer Temperature; Adjusting Refrigerator Shelves; Removing Crisper, Meat Drawer - Whirlpool RS20CK Use And Care Manual

Condition
Check if
Set control setting
Refrigerator section
TOO WARM
1 Door is opened often.
1 Large amount of food added.
1 Too-warm room temperature.
Refrigerator 4
Freezer A
Freezer section
TOO WARM
. Door is opened often.
. Large amount of food added.
n
Too-cold room temperature
(freezer can't cycle often enough).
Refrigerator 3
Freezer C
Both sections
TOO WARM
. Door is opened often.
n
Large amount of food added.
. Too-warm or too-cold room
temperatures.
Refrigerator 4
Freezer B
Refrigerator section
TOO COLD
1 Controls not set correctly. Refrigerator 2
Freezer B
Ice is not made
fast enough
. Heavy ice usage.
. Very cold room temperature
(freezer can't cycle often enough).
Refrigerator 3
Freezer C
Exterior moisture control
The Exterior Moisture Control on the
2. Use the ON setting if moisture
control console operates electric heaters
around the door openings. These heaters
forms on the outside of the
help keep moisture from forming on the
outside of the refrigerator.
refrigerator.
1. Use the OFF setting when humidity
is low.
Adjusting meat drawer
temperature
The meat drawer temperature control
lets more or less cold air flow from an
opening between the freezer and the
refrigerator. This helps to keep the meat
drawer colder than the rest of the refrig-
erator. Slide the control to coldness level
you want.
Adjusting refrigerator
Shelves can be adjusted according to the
way you use your refrigerator.
To remove:
1, Remove food from shelf.
2. Tilt up front.
3. Lift up back until hooks clear the
shelf support slots.
4. Pull shelf straight out.
To replace:
1. Guide the rear shelf hooks into shelf
support slots.
2. Tilt up front until hooks drop into
slots. Lower front of shelf to level
position.
For models RS22AR and RS25AW:
Glass
shelves are strong enough to hold
bottles, milk and other heavy food items.
Be careful when removing or replacing
glass shelves-they are heavy!
Removing crisper, meat
drawer and cover
i
To remove crisper and meat
drawer:
1. Slide crisper or meat drawer
straight forward to the guide stops.
2. Lift front until it clears stops.
3. Slide crisper or meat drawer out the
rest of the way.
4. Replace in reverse order.
To remove covers:
1. Push up glass insert from the
bottom, then slide out with both
hands. (Be careful-the glass is
heavy!)
2. Lift front of cover frame and pull up
and out.
Continued on next page
Page 5