Adjusting Meat Drawer Temperature; Adjusting The Refrigerator Shelves; Removing Crisper, Meat Drawer And Cover - Whirlpool ED25PWXTW00 Use & Care Manual

No-frost refrigerator-freezer
Table of Contents

Advertisement

Available languages

Available languages

Adjusting
meat drawer temperature...
!
USE CONTROL
TO ADJUST
MEAT DRAWER TEMPERATURESI
Cold air flows against the meat drawer through an
opening between the freezer and the refrigerator. This
helps keep the meat drawer colder then the rest of the
refrigerator.
Set the control to let more or less cold air through.
Adjusting
the refrigerator
shelves...
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough to
hold bottles, milk and other heavy food items.
GLASS SHELVES ARE
HEAVY. BE CAREFUL.
To remove glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pullshelf straight out.
To replace glass shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing the crisper, meat
drawer and cover...
To remove the crisper and meat drawer:
1. Slide crisper and meat drawer straight out to the
stop, lift drawer, then slide the rest of the way out.
2. Replace in reverse order.
To remove the covers:
1. Push up crisper cover glass insert from bottom,
then slide out with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Repeat for meat drawer cover.
To replace the covers:
1. Fit back of meat drawer cover in notch supports on
walls of refrigerator, then lower into place.
2. Repeat for crisper cover frame.
3
Slide back of crisper cover glass insert into place,
then lower front.
PULL OUT TO THE STOP,
LIFT THE FRONT
AND PULL AGAIN.
REMOVE THE
GLASSINSERT,
LIFT THE FRAME FRONT,
THEN THE BACK.
GLASSIS
HEAVY.
BE CAREFUL.

Advertisement

Table of Contents
loading

Table of Contents