Using Your Refrigerator
Continued
Use control to
adjust meat drawer
temperature.
Pull out to the stop,
lift the front
and pull again.
A
Step 2
Adjusting
the meat drawer
temperature
Cold air flows against the meat drawer through an
opening between the freezer and the refrigerator.
This helps keep the meat drawer colder than the
rest of the refrigerator.
Slide the control to let more or less cold air
through.
Removing
the snack
bin
To remove
the snack
bin:
1. Slide snack bin with an even, constant
motion straight out to the stop.
2. Lift the front.
3. Slide bin the rest of the way out.
4. Replace in reverse order.
Adjusting
the wine rack
To remove
the wine rack:
1. Lift front of wine rack.
2. Pull rack off rear support.
3. Replace in reverse order.
Removing
the freezer
baskets
To remove
a basket:
1. Slide out to the stop.
2. Lift the front to clear the stop.
3. Slide out the rest of the way.
To replace
a basket:
1. Place basket on the slides.
2. Make sure the wire stops clear the front
of the slides.
3. Slide basket in.
Pull out to the stop,
lift the front
and pull again.
Need help?
Do you have a question about the ED25D and is the answer not in the manual?