Adjusting Refrigerator Shelves; Removing Freezer Shelves; Adjusting The Door Shelves; Moving The Meat Pan And Cover - Whirlpool ET20MK Use & Care Manual

No-frost refrigerator freezer
Hide thumbs Also See for ET20MK:
Table of Contents

Advertisement

Adjusting the refrigerator shelves... TO
remove glass shelves:
Shelves can be adjusted
to match the way you use
1. Tilt up at front.
your refrigerator.
Glass shelves are strong enough to
2. Lift up at back.
hold bottles,
milk and other heavy food items.
3. Pull shelf straight out.
To replace:
Ghs
shelves ore
heovy Be careful.
1. Guide
the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop Into slot. Lower
front of shelf to level position.
Removing freezer shelves...
1. Lift front slightly.
2. Lift back off supports.
3. Replace
in reverse order
Lift the ,,..,JY@?-=-
Then the Back
III
II
Adjusting the Door Shelves...
To remove door shelves:
1. Lift up shelf.
2. Tilt up at front.
3. Pull shelf straight out.
To replace door shelves:
I, Tilt up front of shelf until
hooks fit into slots in the
shelf support.
2. Lower front of shelf to level
position.
3. Push shelf down.
Removing crispers
and crisper cover.. .
!Pull Out to Stop. Lltt the Front
and Pull Again.
Remove the
I
Glass Insert,
Lift the Frame Fro
then the Back.
Glass Is heavy.
Be Caretul.
To Remove the Crispers:
I. Slide crisper straight out to stop, lift front, then slide
the rest of the
way
out.
2. Replace
in the reverse order
To Remove the Cover:
I. Push up glass insert from bottom, then slide out with
both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Remove metal cover support.
To Replace the Cover:
1. Replace
metal cover support on wall supports in
front section of cabinet.
2. Fit back of cover frame into notch supports on walls
of refrigerator, then lower into place.
3. Slide back
of glass insert into place,
then lower
front.
Moving the meat pan and covet,
1.
Pull Out to Stop. LIR the
Front and Pull Agaln.
Glass Is heavy.
Be Caretul.
To Remove the Meat Pan:
I. Slide the meat pan out to stop.
2. Lift the front.
3. Slide the pan the rest of the way
4. Replace
in reverse order.
To Remove the Cover:
1. Tilt front of cover up, lift at back,
Out.
out.
, and pull straight
2. Replace
in reverse order

Advertisement

Table of Contents
loading

Table of Contents