Adjusting The Refrigerator Shelves; Removing The Crisper(S) And Cover - Whirlpool ET14HJXDN00 Use And Care Manual

Adjusting the refrigerator shelves
Adjust the refrigerator shelves to match the
way you use your refrigerator.
To remove
the
shelves:
1. Remove items from the shelf.
2. Slide shelf straight out to the stop.
3.
Lii back of shelf over stop.
4. Slide shelf out the rest of the way.
To replace the shelves:
1. Slide back of shelf into shelf track in wall
of cabinet.
2. Guide front of shelf into shelf track.
3. Slide shelf in all the way.
Removing the crisper(s) and cover
To remove the crisper(s):
1. Slide crisper(s) straight out to the stop.
2. Lift the front.
3.
Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Lift cover front and remove the cover
support.
Lift cover front,
then the back
2.
Lii cover up and slide out.
To replace the cover:
1. Fit wver tabs into lowest cabinet slots
and push in. Lower the front retainers into
place.
2. Insert cover support (with the long tab
toward the front) into the groove on the
underside of the cover.
NOTE: lf the support needs adjustment,
turn base clockwise to raise or counter-
clockwise to lower.
9