Adjusting The Door Bins; Removing The Tall-Bottle Retainer; Adjusting The Cantilever Refrigerator Shelves - Whirlpool ET22PKXDN00 Use And Care Manual

Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1.
Slide bin in above desired support button.
2. Push down until it stops.
Removing the tall-bottle retainer
The tall-bottle retainer fits onto any door bin in your
refrigerator. The retainer holds tall bottles in place
when opening and closing the refrigerator door.
To remove tall-bottle retalner:
1.
Grasp center of retainer.
2. Pull up and off of bin.
To replace tall-bottle retainer:
1.
Position retainer above desired door bin.
2. Gently push retainer down onto bin.
3. Make sure both side notches sit firmly against bin.
~Notch
Adjusting the cantilever refrigerator shelves
Adjust the shelves to match the way you use your
refrigerator. Glass shelves are strong enough to
hold bottles, milk, and other heavy food items.
To remove a shelf:
1.
Remove items from shelf.
2. Tilt shelf up at front.
3. Lift shelf at back.
4. Pull shelf straight out.
To replace a shelf:
1.
Guide the rear shelf hooks into the slots in the
shelf supports on the back liner wall.
2. Tilt front of shelf up until hooks drop into slots.
3. Lower front of shelf to a level position.
NOTE:
Glass shelves are heavy. Handle them
carefully.