Table of Contents
Advertisement
Adjusting the crisper humidity con
You can
control
the amount
of humidity
in the
moisture-sealed
crisper.
1. The control
can
be adjusted
to any
setting
between
LOW and HIGH.
2. LOW (open]
lets moist air out of crisper
for best
storage
of fruits and vegetables
with skins.
3. HIGH (closed]
keeps moist air in the crisper
for
best storage
of fresh leafy vegetables.
,.a,
Adjusting the refrigerator shelves...
Shelves can be adjusted
to match the way you use
your refrigerator.
Glass shelves are strong enough
to hold bottles, milk and other heavy
food items.
To remove
glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace
glass shelves:
I. Guide
the rear hooks into the slots in
2. Tilt up front of shelf until hooks drop
Lower front of shelf to level position.
: I r.UC" i ! ,*1s,wce4r;*ii 3~
To remove
the shelf:
1. Lift front slightly.
2. Lift back off supports.
3. Replace
in reverse order.
To adjust
the shelf:
1. Remove
shelf.
2. Remove
supports
by sliding
upwards.
SHELF SUPPORT
3. Replace
supports
on desired
level.
4. Replace
shelf.
,
Removing crispers and crisper cover...
PULL OUT TO STOP, LIFT THE FRONT
Ii31
AND PULL AGAIN
I, 11,
To remove
the
CCISpect:
6
GLASS IS HEAVY.
BE CAREFUL.
REMOVE THE
GLASS INSERT,
the shelf
into slot,
1. Slide crisper
straight
out to stop, lift front, then
slide the rest of the way out.
2. Replace
in the reverse order.
To remove
the cover:
1. Push up glass insert from bottom, then slide out
with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling
up and out.
4. Remove
metal cover support.
To replace
the cover:
1. Replace
metal cover support
on wall supports
in front section
of cabinet
2. Fit back of corner
into notch supports
on walls of
refrigerator,
then lower into place.
3. Slide back
of glass insert into place,
then lower
front.
Advertisement
Table of Contents
