Adjusting The Back Height - Otto Bock M1 Intro Instructions For Use Manual

INFORMATION!
Make sure to firmly retighten all screws and nuts after making adjustments (6 Nm).
Fasten the hook-and-loop attachment again between the back padding and the
seat upholstery.
A

6.11 Adjusting the back height

The back tube which is integrated into the posterior frame allows for the adjustment of the back
height in increments of 2.5 cm.
INFORMATION!
Remove the screws A and B from the rear wheel adapter.
Set the desired back height.
INFORMATION!
Make sure to firmly retighten all screws and nuts after making adjustments (8 Nm).
58
31
(Fig. 32)
32