Fitting The Plinth; Refit The Drawer; Refitting The Oven Door; Customer Care - Falcon Professional + FX User Manual

Check the appliance is electrically safe and gas sound when you have finished.
Oven Check
Turn on the oven and check that it starts to heat up. Check
that the oven lights are working.
Note: The oven light bulb is not included in the guarantee.
Turn off the oven.

Fitting the Plinth

Remove the 3 screws for the plinth mounts along the front
bottom edge of the range (Fig.7-17). Fasten the plinth using
these screws (alternative colour screws can be found in the
loose parts pack).
Refit the Drawer
Rest the drawer back on the side runners and, keeping it level,
push it right back. The clips should click into position holding
the drawer to the side runners (Fig.7-18).
Refitting the Oven Door
To refit the door, slide the hinges back into their slots. Rotate
the locking 'U' clips back to fit onto the hinges.

Customer Care

Installer: Please complete your details in this Guide, inform
the user how to operate the cooker and hand oven the
instructions.
Thank you
INSTALLATION
ArtNo.341-0001 - 90SC - Drawer pulled forward
27
ArtNo.281-0026 - Front plinth
ArtNo.342-0007 - 90 Prof+ FX
- drawer locking
Fig.7-17
Fig.7-18