Falcon 110 Dual Fuel User Manual & Installation & Service Instructions
Hide thumbs
Also See for 110 Dual Fuel:
- Instructions for use and installation (52 pages) ,
- User's manual & installation instructions (44 pages) ,
- User's manual and installation instructions (40 pages)
Related Manuals for Falcon 110 Dual Fuel
Summary of Contents for Falcon 110 Dual Fuel
-
Page 1: User Guide
Elite �������������� ���� ���� 110 Dual Fuel User Guide & Installation & Service Instructions ArtNo.000-0008 Falcon logo shaded U109740-04 Australia... -
Page 2: Table Of Contents
Contents Before You Start... Cooker Overview Cooking Tips Cooking Table Troubleshooting Cleaning Your Cooker Installation Conversion to Propane Gas Servicing 10. Circuit Diagram 11. Technical Data... -
Page 3: Before You Start
Australia 1. Before You Start... Ventilation Thank you for buying this cooker. It should give you many years of trouble-free cooking if installed and operated The use of a gas cooking appliance results in the production correctly. It is important that you read this section before of heat and moisture in the room in which it is installed. - Page 4 Australia Cleaning DO NOT spray aerosols in the area of the cooker while it is on. In the interests of hygiene and safety, the cooker should be kept clean at all times as a build up in fats and other food Use dry oven gloves when applicable –...
-
Page 5: Cooker Overview
�� �� � � � � ArtNo.215-0009 - 110 Elan DF The 110 dual fuel cooker (Fig.2-1) has the following features: Fig.2-2 6 hotplate burners including 2 wok burners A control panel A glide-out grill Main multi-function oven Fan oven... - Page 6 Note: The use of aluminium pans may cause metallic marking of the pan supports. This does not affect the durability of the enamel and may be cleaned off with an appropriate metal cleaner. Fig.2-8 ArtNo.311-0047 - Elan 110 Wok burner...
-
Page 7: The Griddle
DO NOT put it on any other burner – it is not designed to fit in any of the other pan supports. ArtNo.215-0007 - Elan 110 griddle on hotplate Position the griddle over the hotplate burners resting on the pan support (Fig 2-12). Check that it is securely located. -
Page 8: The Ovens
Once the grill has preheated, slide the carriage out again. With the trivet back in place with the food on it, slide the ArtNo.216-0003 - Elan MF grill control carriage back into the grill chamber. Ensure that it is pushed right in. - Page 9 This function operates the fan, circulating air heated with each function. Remember – not all functions will be ArtNo.030-0028 - Elan MF symbols by the elements at the top and the base of the oven. suitable for all food types.
- Page 10 Turn the oven knob to the desired temperature (Fig.2-20). The oven indicator light will glow until the oven has reached the temperature selected. It will then cycle on and off during cooking (Fig.2-21). ArtNo.216-0005 - Elan setting the MF oven Fig.2-20 Fig.2-21 ArtNo.316-0007 - 110 Elan oven setting ArtNo.316-0008 - Elan indicator light...
-
Page 11: Setting The Time Of Day
Australia The Clock Fig.2-22 ArtNo.300-0004 2-button clock annotated You can use the timer (Fig.2-22) to turn the ovens on and off. The clock must be set to the time of day before the ovens will work. Setting the time of day When the clock is first connected, the display flashes ( 0.00) and () alternately. -
Page 12: Manual Cooking
Australia Use the Adjusting knob to set the ‘cook time’ you need Fig.2-28 Fig.2-29 (Fig.2-28). ArtNo.301-0010 2BC Turn the Timer knob to the () position. The display will show ArtNo.301-0008 2BC Setting the cooking time Stopping the oven 2 the current time of day plus the ‘cook time’ you just set. Use the Adjusting knob to set the ‘stop time’... -
Page 13: Oven Shelves
Australia Accessories Fig.2-36 Oven Shelves � In addition to the flat shelves (Fig.2-35), some models are supplied with a drop shelf (Fig.2-36). The drop shelf increases ArtNo.320-0010 Flat & drop shelves the possibilities for oven shelf spacing. The oven shelves can be easily removed and refitted. �... - Page 14 At each side, hold the front of the drawer and pull the side rail forward so that the clips click into position, holding the drawer to the side rails (Fig.2-47). ArtNo.342-0003 - Elan drawer pulled out Fig.2-46 ArtNo.342-0002 - Elan - drawer position Fig.2-47 ArtNo.340-0004 - Elan - Refitting the drawer...
-
Page 15: Cooking Tips
Australia 3. Cooking Tips ArtNo.030-0002GB - Cooking tips - electric Tips on Cooking with the Timer General Oven Tips If you want to cook more than one dish, choose dishes that The wire shelves should always be pushed firmly to the back require approximately the same cooking time. -
Page 16: Cooking Table
DocNo.031-0002 - Cooking table Australia 4. Cooking Table The oven control settings and cooking times given in the table below are intended to be used AS A GUIDE ONLY. Individual tastes may require the temperature to be altered to provide a preferred result. -
Page 17: Troubleshooting
Australia 5. Troubleshooting Steam is coming from the oven The oven is not cooking evenly When cooking foods with a high water content (e.g. If you are cooking a large item, be prepared to turn it oven fries) there may be some steam visible at the rear round during cooking. - Page 18 Australia Hotplate ignition or cooktop burners faulty Fig.5-1 Is the power on? Are the sparker (ignition electrode) or burner holes blocked by debris? ArtNo.324-0005 Oven light bulb Are the burner heads correctly located? See the section entitled ‘Cleaning’ . Remember that each cooktop burner has a special safety device that stops the flow of gas if the flame goes out.
-
Page 19: Cleaning Your Cooker
Australia 6. Cleaning Your Cooker Doc AUS.040-0004 - Cleaning - 110DF - GO grill Isolate the electricity supply before carrying out any major Fig.6-1 cleaning. Allow the cooker to cool. � Never use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach �... -
Page 20: The Wok Cradle
Australia Now fit the two burner caps, ensuring that they are seated Fig.6-5 properly. Check the burner ports are not blocked. If a blockage occurs, remove stubborn particles using a piece of fuse wire. The Wok Cradle Recommended cleaning materials are hot soapy water, a moistened soap pad, cream cleaner or nylon scourer. - Page 21 (although we do supply a specialist Fascia Cleaner). After cleaning, polish with a dry cloth. ArtNo.320-0002c - Oven door side screws (Elan) Ovens The oven door front panels can be taken off so that the glass Fig.6-11 panels can be cleaned.
-
Page 22: Cleaning Table
Australia Cleaning Table Cleaners listed are available from supermarkets or electrical retailers as stated. For enamelled surfaces use a cleaner that is approved for use on vitreous enamel. Regular cleaning is recommended. For easier cleaning, wipe up any spillages immediately. To help keep your oven clean, cover meat when roasting, with foil or use a roasting bag. -
Page 23: Installation
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. 7. Installation Service and Spares Firstly, please complete the appliance details below and keep them safe for future reference – this information will enable us to accurately identify the particular appliance and help us to help you. Filling this in now will save time and inconvenience if you later have a problem with the appliance. -
Page 24: Dear Installer
INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. Dear Installer Provision of Ventilation Before you start your installation, please complete the details This appliance is not connected to a combustion products below, so that, if your customer has a problem relating to evacuation device. - Page 25 INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. You will need the following equipment to complete the Checking the Parts: cooker installation satisfactorily: Levelling tool 4 pan supports • Restraining chain: If the cooker is to be supplied with gas through a flexible hose, a restraining chain must be fitted.
-
Page 26: Moving The Cooker
floor covering is firmly fixed, or removed to prevent it being disturbed when moving the cooker around. ArtNo.342-0003 - Elan drawer pulled out From the back tilt the cooker forward and remove the rear half of the polystyrene base pack (Fig.7-3). Repeat from the front and remove the front half of the poly base. -
Page 27: Completing The Move
For safety’s sake push the drawer runners back out of the way. Put the drawer somewhere safe - do not refit it until the installation is complete. ArtNo.342-0002 - Elan - drawer position First fit the levelling tool on the hexagonal adjusting nut (Fig.7-6). -
Page 28: Stability Bracket And Chain
(i.e. from Fig.7-13 floor level to underside of the top member) and ensure the bracket does not foul the oven burner assembly. ArtNo.070-0011 - Elan bracket holes Fitting the Restraining Chain The restraining chain MUST be fitted. ���������... -
Page 29: Pressure Testing
If in doubt contact your supplier. Screw connect the threaded ArtNo.090-0027 - 90 Elan gas connections end of the hose into the gas inlet. After completing the gas connection, check the cooker is gas sound with a pressure test. - Page 30 INSTALLATION Check the appliance is electrically safe and gas sound when you have finished. The total electrical load of the appliance is approximately Fig.7-15 8kW. The cable size used should be suitable for this load and comply with all local requirements (i.e. PVC Insulated cable IEC 60227 –...
-
Page 31: Refit The Drawer
‘U’ clips back to fit onto the hinges. Customer Care Installer: Please complete your details in this Guide, inform the user how to operate the cooker and hand oven the ArtNo.340-0004 - Elan - Refitting the drawer instructions. Thank you... -
Page 32: Conversion To Propane Gas
Reassemble in the reverse order (Fig.8-1). �� Tap Adjustment ArtNo.215-0013 - 90 Elan DF - Removing the control panel Disconnect from the electricity supply. Remove all control knobs. Remove the handrail (if fitted). Fig.8-3 Remove the two plastic blanking plugs, followed by the two end bracket fixing screws. -
Page 33: Affix Label
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished. Set the Governor Fig.8-4 Unscrew the governor’s brass top. In the base of the brass top is a plastic snap-in converter device (Fig.8-4). -
Page 34: Servicing
Check the operation of the timer, ignition, and oven light switches. �� ArtNo.215-0013 - 90 Elan DF - Removing the control panel To Remove the Hotplate Top Disconnect from electricity supply. Remove the pan supports, cooktop burner caps and tops. - Page 35 WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. To Change a Hotplate Tap Fit the new generator to the cooker and replace the leads, referring to the wiring diagram.
- Page 36 WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. 13. To Remove the Grill Outer Door Panel Fig.9-5 Open the left-hand oven door and remove the two screws from the bottom edge of the grill door.
- Page 37 WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. Remove the door handle from the panel by unscrewing the Fig.9-10 two retaining nuts. Fit the door handle to the new panel and refit the two blanking plugs to the fixing holes.
- Page 38 WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. 25. To Remove the Fan Oven Element Fig.9-15 Disconnect from electricity supply. Remove the oven inner back (see 25). Remove the two screws from the top of the element and the one from the bottom of the element inside the oven (Fig.9-16).
- Page 39 WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON Disconnect from electricity before servicing. Check appliance is safe when you have finished. 28. To Change Oven Light Bulb Fig.9-19 Fig.9-20 Disconnect from electricity supply. Make sure the oven is cool. Open the oven door and remove the oven shelves.
-
Page 40: Circuit Diagram
Australia 10. Circuit Diagram � � � � � � � � � � � � � � �� � � � � � �� � � � � � � �� �� � �� � � �� �� �� ��... -
Page 41: Technical Data
Australia 11. Technical Data DocAUS.102-0004 - Technical data - 110DF This cooker is designed for use on Natural Gas, although a conversion for LP (LPG X Propane (2.54kPa)) gas is available. INSTALLER: Please leave these instructions with the user. DATA BADGE LOCATION: Cooker back. The serial number is repeated on the badge below the left-hand oven door opening. Country of Destination: Australia Test Pressures (quoted on the data badge) Electric... - Page 44 ������������������������������ �������������������������������������������������� ������������������������������������������������� �������������������������������������������������� ����������������������������������������������� ArtNo.000-0003 CE logo...
Need help?
Do you have a question about the 110 Dual Fuel and is the answer not in the manual?
Questions and answers