Maintenance; Administration; Time Zone - Kraun ADSL2/2+ Wireless-N Router User Manual

4.6 Maintenance

Choose "Maintenance", you can see the next submenus:
Click any of them, and you will be able to configure the corresponding function.

4.6.1 Administration

Choose "MaintenanceAdministration", you can set new password for admin in the screen (shown in Figure
4-48).
NOTE: There is only one account that can access Web-Management interface. The default account is "admin",
and the password is "admin". Admin has read/write access privilege.
When you change the password, you should enter the new password twice, and then click SAVE to
make the new password take effect.

4.6.2 Time Zone

Choose "MaintenanceTime Zone", you can configure the system time in the screen (shown in Figure 4-49).
The system time is the time used by the device for scheduling services. There are three methods to configure the
time. You can manually set the time or connect to a NTP (Network Time Protocol) server. If a NTP server is set, you
will only need to set the time zone. If you manually set the time, you may also set Daylight Saving dates and the
system time will automatically adjust on those dates.
Figure 4-47
Figure 4-48
51
Manual
www.kraun.it