Kraun ADSL2/2+ Wireless-N Router User Manual page 46

Step 2: Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then select the Interface
"PVC0", and select the Direction "Outgoing" for the first rule.
NOTE: If you want to make the rule take effect, please select Yes to active the rule.
Step 3: Enter the "MAC Address" and select the Unmatched rule as "Next".
Step 4: Finally, click the SAVE to save the entry.
Step 5: Go to Step 2 to configure the next rule: Block the PC with MAC address 00-0A-EB-00-07-5F to access
the Internet.
NOTE: After you complete the MAC filter rules for the example, the Filter list will show as follows. You can enter
the IP / MAC Filter Set Index to view the information about the rule.
Other operations for the entries as shown in Figure 4-39:
Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to view or modify the entry.
Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to locate the specific rule, and then click the
DELETE button to delete the entry.
46
Manual
www.kraun.it