Kraun ADSL2/2+ Wireless-N Router User Manual page 30

Method One: Enter the PIN into my Router
Step 1: For the configuration of the wireless adapter, please choose "Enter a PIN into my access point or a
registrar" in the configuration utility of the WPS, and get the PIN code on the screen as below, then
click Next.
Step 2: For the Router, keep PIN code selected and enter the PIN code of the wireless adapter in the field after
enrollee PIN code as shown below. Then click Start WPS.
Method Two: Enter the PIN from my Router
Step 1: Get the Current PIN code of the Router from AP self PIN code in Figure 4-22(each Router has its unique
PIN code, here takes the PIN code 55924054 of this Router for example).
Step 2: For the configuration of the wireless adapter, please choose "Enter a PIN from my access point" in
the configuration utility of the WPS as below, and enter the PIN code of the Router into the field after
"Access Point PIN". Then click Next.
The WPS Configuration Screen of Wireless Adapter
Figure 4-22
30
Manual
www.kraun.it