Wpa2-Psk; Wpa-Psk/Wpa2-Psk - Kraun ADSL2/2+ Wireless-N Router User Manual

y Encryption: Select the encryption you want to use: TKIP/AES, TKIP or AES (AES is an encryption method
stronger than TKIP).
• TKIP (Temporal Key Integrity Protocol) - a wireless encryption protocol that provides dynamic encryption
keys for each packet transmitted.
• AES (Advanced Encryption Standard) - A security method that uses symmetric 128-bit block data
encryption.
y Pre-Shared Key: Enter the key shared by the Router and your other network devices. It must have 8-63 ASCII
characters or 64 Hexadecimal digits.

4) WPA2-PSK

To configure WPA2-PSK settings, select the WPA2-PSK option from the drop-down list. The menu will change to
offer the appropriate settings. WPA2-PSK requires a shared key and does not use a separate server for authenti-
cation. PSK keys can be ASCII or Hex type.

5) WPA-PSK/WPA2-PSK

To configure WPA-PSK/WPA2-PSK settings, select the WPA-PSK/WPA2-PSK option from the drop-down list. The
menu will change to offer the appropriate settings. WPA-PSK/WPA2-PSK requires a shared key and does not use
a separate server for authentication. PSK keys can be ASCII or Hex type. WPA-PSK/WPA2-PSK is more flexible than
WPA-PSK or WPA2-PSK.
y WPS Settings: These are the settings of the WPS.
If the wireless adapter supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by
PIN with the following two methods. Click PIN code, you will see the screen as shown below.
Figure 4-19
Figure 4-20
Figure 4-21
29
Manual
www.kraun.it