Wireless - Kraun ADSL2/2+ Wireless-N Router User Manual

4.3.3 Wireless

Choose "Interface SetupWireless" menu, and you will see the Wireless screen (shown in Figure 4-14 ). Please
configure the parameters for wireless according to the descriptions below.
y Access point Settings: These are the settings of the access point. You can configure the rules to allow wireless-
equipped computers and other devices to communicate with a wireless network.
• Access point: Select Activated to allow wireless station to associate with the access point.
• Channel: Select the channel you want to use from the drop-down List of Channel. This field determines
which operating frequency will be used. It is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
• Beacon Interval: Enter a value between 20-1000 milliseconds. The Beacon Interval value indicates the
frequency interval of the beacon. A beacon is a packet broadcast by the Router to synchronize the wireless
network. The default value is 100.
Figure 4-14
26
Manual
www.kraun.it