Installation; Opening/Closing The Housing - Dimplex SOLCU Installation And Operating Instructions Manual

3.3.4 Other symbols and markings
Symbol Meaning
Precondition for action
✓
Call to action

Result of action

• List
Emphasis on
Emphasis on issue at hand
issue at hand
Press "Arrow up/down" for scrolling
:
Press "Arrow down" for scrolling through the menu
:
or to adjust a value
Press "Arrow up" for scrolling through the menu or
:
to adjust a value
SET: Press "SET" button to confirm or activate a value
ESC: Press "ESC" button to cancel
4

Installation

4.1

Opening/closing the housing

DANGER
Risk of death by electrocution!
Remove the controller from the power supply before opening the case.

Make sure that the power supply cannot be unintentionally switched

back on.
Do not damage the casing.

Only switch the power supply back on after the casing has been closed.

The upper casing is connected to the lower casing by two latches, and
fastened with a screw.
4.1.1 Opening the case
Loosen the screw and remove the upper case in an upwards direction.

4.1.2 Closing the case
Place the upper case over the lower case at an angle. Insert the

latches into the recesses of the lower case.
Pivot the upper case down and feed the operating buttons through

the matching holes.
Fasten the casing tightly with the screw.

Latch
Lower case
8
Operating buttons
Upper casing
Screw
730.138 | 08.1
EN