Dimplex SOLCU Installation And Operating Instructions Manual page 39

[.................] [.................]
Display: 3.1.4 Display: 3.1.4
[Temp. controlled] [Temp. controlled]
T T ? ?
[...]: 30°C [...]: 30°C
[...]: 35°C [...]: 35°C
Display: 3.1.4.1 Display: 3.1.4.1
[on] [on]
[off] [off]
[................] [................]
Display: 3.1.5 Display: 3.1.5
[Pulse controlled] [Pulse controlled]
Input: Input: ? ?
Circulation:  min Circulation:  min
Wait time: Wait time: 10 min 10 min
Display: 3.1.5.1 Display: 3.1.5.1
EN
Activating temperature control
"Functions" submenu selected, see "Selecting a function"
✓
(see chapter 7.3.1).
Circulation activated, see "Activating a function" (see chapter 7.3.1)
✓
Outputs selected, see "Selecting an output" (chapter 7.3.1).
✓
: press button.

The "Temp. controlled" display appears.

SET: press button.

 
Temperature control is activated.

: press button.

The display for setting the temperature input and the "on" and

"off" values appears.
SET: press button.

"T" flashes in the display (circulation pipe temperature input).

: choose the desired input.

SET: press button to confirm.

The "on" value flashes after confirmation of the temperature

sensor.
: set the "on" value.

SET: press button to confirm.

 
The "off" value flashes after confirmation of the "on" value.

: set the "off" value.

SET: press to confirm and close.

The settings are saved.

Activating pulse control
"Functions" submenu selected, see "Selecting a function"
✓
(see chapter 7.3.1).
Circulation activated, see "Activating a function" (see chapter 7.3.1).
✓
Outputs selected, see "Selecting an output" (chapter 7.3.1).
✓
: press button.

The "Pulse controlled" display appears.

SET: press button.

 
Pulse control is activated.

: press button.

The display for setting the pulse input, circulation time, and wait

time appears.
SET: press button.

Pulse input flashes.

: choose the desired input.

SET: press button to confirm.

 
The circulation duration flashes after confirmation of the input.

: set the circulation duration.

SET: press button to confirm.

The wait time flashes after confirmation of the circulation duration.

: set the wait time.

SET: press button to confirm the wait time and close.

The settings are saved.

ESC: leave the "Circulation" submenu.

730.138 | 08.1
39