Functions - Dimplex SOLCU Installation And Operating Instructions Manual

Funktionen Funktionen Funktionen Funktionen Funktionen Funktionen [...............] [...............]
Display: 3 Display: 3
[Function] [Function]
[.......................] [.......................]
on-off on-off
/ /
[Time function] [Time function]
[...] [...]
[...] [...]
[off] [off]
[on] [on]
Sample display Sample display
EN
7.3

Functions

 
Additional controller settings can be made by using the "Functions" sub-
menu.
The following submenus can be opened using the "Functions" menu item:
• Circulation 7.3.
• Back-up heating 7.3.3
• Solid fuel boiler 7.3.4
• Quick charge 7.3.5
• Heat quantity 7.3.6
• Thermostat 7.3.7
• Difference thermostat 7.3.8
• Time function 7.3.9
• Interval 7.3.10
• Stagnation reduction 7.3.11
• Holiday function / recooling 7.3.1
• Frost protection 7.3.13
• Display storage tank top 7.3.14
• Alarm output 7.3.15
An overview of the factory settings and the ranges of possible settings
can be found in the table in chapter 14.3 "Parameter values for func-
tions".
7.3.1 Accessing a function
Before making settings within a function, you must perform the follow-
ing steps:
Selecting a function
 
SET: press button for approx.  sec.

: select the menu item "Functions".

SET: open the submenu "Functions".

: select a function.

Activating/deactivating a function
 
SET: press button.

The display for activating (on) or deactivating (off) the function

is shown.
SET: press button for approx.  sec.

The function is activated or deactivated.

NOTE
An information window is displayed if the function cannot be activated
(see chapter 11 "Information windows").
Selecting an output
: press button.

The display for setting the output appears.

SET: press button.

 
Output (?) flashes.

: choose the desired output.

SET: press button to confirm.

730.138 | 08.1
37