Table of Contents
Advertisement
1.3
Detecting faults
Check the display regularly.
In case of faults, isolate the cause (see chapter 10.1 "Causes of problems").
As soon as it becomes evident that safe operation is no longer guaranteed (e.g. visible damage),
remove the device from the mains supply immediately.
Have trained professional personnel remedy the fault.
1.4
Hot water temperature
In order to limit the hot water temperature to 60 °C at the outlets, a hot water mixer must be installed.
1.5
Disposal
Dispose of the controller in accordance with the regional regulations.
1.6
Exclusion of liability
The manufacturer can neither monitor the compliance with this manual nor the conditions and methods
during the installation, operation, usage and maintenance of the controller. Improper installation of the
system may result in damage to property and, as a result, to bodily injury.
Therefore, the manufacturer assumes no responsibility and liability for loss, damage or costs which result
from or are in any way related to incorrect installation, improper operation, incorrect execution of installa-
tion work and incorrect usage and maintenance.
Similarly, we assume no responsibility for patent right or other right infringements of third parties caused
by usage of this controller.
The manufacturer reserves the right to make changes to the product, technical data or installation and
operating instructions without prior notice.
EN
730.138 | 08.1
5
Hide quick links:
Advertisement
Table of Contents
