Installation; Opening/Closing The Housing - Dimplex SOLCU3 Installation And Operating Instructions Manual

3.3.4 Other symbols and markings
Symbol Meaning
Condition for action
✓
Call to action

Result of action

• List
Emphasis on Emphasis on issue at hand
issue at hand
Press „Arrow up/down" for scrolling.
:
Press „Arrow down" for scrolling through the
:
menu or to adjust a value.
Press „Arrow up" for scrolling through the menu
:
or to adjust a value.
SET: Press „SET" button to confirm or activate a value.
ESC: Press „ESC" button to cancel.
4

Installation

4.1

Opening/closing the housing

DANGER
Risk of death by electrocution!
Remove the controller from the power supply before opening the case.

Make sure that the power supply cannot be unintentionally switched

back on.
Do not damage the case.

Only switch the power supply back on after the case has been closed.

The upper case is connected to the lower case by two latches, and fas-
tened with a screw.
4.1.1 Opening the case
Loosen the screw and remove the upper case in an upwards direc-

tion.
4.1.2 Closing the case
Place the upper case over the lower case at an angle. Insert the

latches into the recesses of the lower case.
Pivot the upper case down and feed the operating buttons through

the matching holes.
Fasten the case tightly with the screw.

Latch
Lower case
8
Operating buttons
Upper casing
Screw
730.137 | 08.37
EN