Technical Data; Performance Data - Dimplex SOLCU Installation And Operating Instructions Manual

13

Technical data

Temperature difference controller
Rated voltage
(system voltage)
Max. own consumption
Inputs
Additional inputs
Outputs
Additional outputs
Number of pre-defined hydraulic
schemes
Interfaces
Ingress protection
Protection class
Permitted ambient temperature
Display
Dimensions L x W x H [mm]
Software class
Type of action
Type of fastening for permanently con-
nected cables
Intended transport condition
Degree of pollution
Ball pressure test temperature
overvoltage category
13.1

Performance data

Output Power
R1 50 W (30 VAC)/15 W (115 VAC)
R 800 W (30 VAC)/400 W (115 VAC)
DANGER
Risk of death by electrocution!
Fuses may only be changed after disconnection from the power supply,
and by trained professional personnel!
66
30 VAC, 50 Hz
[optional 115 VAC, 60 Hz]
≤ 4 W
5
T1 - T4: temperature recording (Pt1000)
T5: temperature recording (Pt1000) or pulse recording
1 x Direct Sensor input (flow rate and temperature)

R1: TRIAC output for RPM control,
max. switching current 1.1 A AC
R: relay switched output, max. switching current 3.47 AAC
1 x alarm output (), potential-free contact for SELV max. 4 V,
max.  A
14
RS3 and RS485
IP 0/DIN 40050
I
0 to +45 °C
Animated graphic LCD with backlighting
170 x 170 x 46
A
Type 1B
Type X
No information

850 °C
Class II (500 V)
Fuse
Internal fuse: 1.6 A T, 50 V or
T 1.6 A H 50 V (Littelfuse: 1501.6)
Internal fuse: 4 A T, 50 V or
T 4 A H 50 V (Littelfuse: 15004)
730.138 | 08.1
EN