Automatic Operation - Dimplex SOLCU Installation And Operating Instructions Manual

8

Automatic operation

Symbols
In "Automatic" operation of the controller, the status display with the selected solar energy system and
other set functions are shown on the display. You can access the values of the individual sensors, the
outputs' running times, and additionally set functions, by using the operating buttons (arrow up and arrow
down). Other symbols provide information on the condition of the solar system.
The various symbols are displayed as soon as additional functions are activated or values exceed or fall
below parameters. The display message below shows all symbols simultaneously as an example. In practice,
they appear in various combinations.
1 
3
1
15
14
Symbol for solar circuit's switch-on condition
1
fulfilled
Symbol for maximum collector temperature

reached
Symbol for the currently selected temperature
3
sensor
4 Symbol for the solar circuit
5
Symbol for the storage tank
Symbol (off) for deactivated storage tank
6
Display of the current measured value such
7
as temperature values and outputs' operating
hours
Symbol for the activated frost protection
8
function
56
4
5 6
7
75°C
off
2
max
3
13 1 10
11
EN
8
9
Symbol for the activated holiday/recooling
9
function
Symbol (max) for maximum storage tank
10
and swimming pool temperature reached
Symbol for swimming pool
11
Symbol for stand-alone operation of the
1
swimming pool loading circuit
13
Symbol for external heat exchanger
14
Symbol for 3-way switching valve
15
Symbol for pump
730.138 | 08.1