Toshiba Perception e&ex User Manual page 22

DIGITAL TELEPHONE
To Establish Off-hook Call
Announce from a Station:
1. Lift the handset.
2. Dial the directory number of
the desired station.
3A. If the calling station has an
automatic OCA feature, the
called station will hear warning
tone and you will hear
ringback tone.
3B. If the calling station has a
manual OCA feature, there are
two ways to complete the call:
a. Press the OCA button.
... or ...
b. Press the CONF/TRNS
button, and dial the access
code (# * 8) _____.
4. You may speak to the called
party.
16
You will hear dial tone.
The system reads call forwards and station hunting data, to see if they
are set, since those features take precedence over OCA.
The OCA LED will flash.
The called station will hear warning tone, and you will hear ringback tone.
The OCA call is established.
NOTES:
1. When the called station is having another OCA, your OCA will queue
until the OCA in progress terminates.
2. If the called station is on-hook upon termination, your OCA
automatically becomes an on-hook call.
3. If the called station is off-hook, your OCA becomes an off-hook call
upon termination of OCA in progress.
4. A four-second delay may occur in the operation of OCA when the
following instance takes place:
Station A is talking to station B. Station A needs to consult with
station C. Station A presses the
C, only to find it busy. If station C is equipped for OCA, and station A's
COS allows for OCA to be performed (it is programmed for manual
mode in the DEKT Program) but does not have an
the four-second OCA timer is automatically initiated. The voice path
will then be opened for the announcement.
PERCEPTION e
CONF/TRNS button and dials station
OCA button, then
ex
&