Toshiba Perception e&ex User Manual page 53

PERCEPTION e
ex
&
2. Dial the number of the
message, that you want to
appear, via the dialpad. (See
the above preprogrammed
messages.)
3. Press the MES button (if
equipped) or hang up.
To Cancel a Message on Your
Telephone:
1A. Press the MES button.
... or ...
1B. Lift the handset.
2B. Dial the access code (# 1
_____.
3B. Hang up.
The MES LED will light steadily.
The message will clear from the LCD.
You will hear dial tone.
7)
The message will be canceled.
TO ADD TO A PREPROGRAMMED MESSAGE:
When you select a message, it will appear on your station display. A
cursor (–) will also appear immediately to the far right side of the display.
You can now input additional information (up to a total of 16 characters
for each message). Some system messages may expect you to add
more information. For example:
1. Call _____________________________ .
I Add a station or outside telephone number.
2. Back at __________________________ .
I Add the time you will return.
3. Return at _________________________ .
I Add the date you will return.
TO LEAVE A NEW MESSAGE:
You can leave a completely new, personalized message by overwriting
any of the existing preprogrammed messages. To do this, simply call up
one of the preprogrammed messages as instructed above. When the
cursor appears to the right of the message, shift it to the left margin and
write your new message over the programmed one. The new message
DIGITAL TELEPHONE
47