Toshiba Perception e&ex User Manual page 52

DIGITAL TELEPHONE
To Leave a Message on Your
LCD Telephone:
1. Press the MES button
(handset on-hook) or obtain
dial tone and dial the access
code (# 1 7) _____.
2. Dial the number of the
message, that you want to
appear, via the dialpad. (See
the above preprogrammed
messages.)
3. Press the MES button (if
equipped) or hang up.
To Leave a Message on a non-
LCD Telephone:
1. Press the MES button
(handset on-hook) or dial the
access code (# 1 7) _____
(handset off-hook).
46
personalized message at your station. Any text that you program for
message 9 will be saved and can be used again. However, any text that
you program for messages 0 ~ 8 will be lost when you cancel the
message.
PREPROGRAMMED MESSAGES
0.
1.
2.
3.
4.
5.
6.
7.
8.
9.
The MES LED will flash (if equipped), and "MES NO.?" will be displayed.
The selected message will be displayed.
The MES LED will light steadily.
The MES LED will flash (if equipped).
PERCEPTION e
ex
&