Call Transfer; Call Waiting - Toshiba Perception e&ex User Manual

PERCEPTION e
ex
&
To Reconnect a Held Call:
1. Lift the handset.
2. Press the DN button (this is
necessary only for calls being
held on a DN other than your
primary DN).
To Transfer a Call:
1. Request the party to wait.
2. Press the CONF/TRNS
3. Dial the desired number.*
4. When the called party
answers, announce the call.
5. Hang up to transfer the call.
To Accept the Waiting Call and
If the On-hold call was on your primary
reconnected immediately. The DN LED will change from On-hold to In-
use status.
The DN LED will change from On-hold to In-use status.

CALL TRANSFER

button. The original connection will be placed on hold, you will hear recall dial
tone, and the DN LED will change from In-use to On-hold status.
*If you hear busy tone, return to the original party by pressing the
button.
The call will be transferred.

CALL WAITING

Two short warning tones from your telephone's speaker and a flashing
CWT LED advise you that your attendant has an outside call waiting for
you. When this occurs, you have three choices:
1. Ignore the call. The call will return to the attendant.
2. Terminate your existing call, and accept the new call.
3. Hold the existing call and accept the new call. In this mode, it is
possible to alternate between the two calls until the conversation(s)
are terminated.
DIGITAL TELEPHONE
DN button, you will be
DN
19