Toshiba Perception e&ex User Manual page 40

DIGITAL TELEPHONE
3. Dial the desired telephone
number.
4. Speak at a normal voice level
in the direction of the
telephone.
5. Press the SPKR button when
the call is completed.
To Receive an Incoming Call (on
Speakerphone):
1. Leave the handset on-hook.
2. Press the button
corresponding to the DN or
private line with the flashing
LED.
3. Speak at a normal voice level
in the direction of the
telephone.
4. Press the SPKR button when
the call is completed.
34
The DN or PVL LED will indicate the In-use status, and you will hear dial
tone.
Your call will be terminated.
You will hear a ringing tone.
The DN or PVL LED will indicate the In-use status.
The call will be terminated.
MICROPHONE CONTROL:
The MIC button cuts off the speakerphone's microphone for private
conversations for as long as the button is pressed. When the button is
released, the microphone once again becomes active. The MIC LED
indicates the status of the microphone:
LED MICROPHONE
ON ON
OFF OFF
NOTES:
1. To change from speakerphone to handset, lift the handset.
2. To change from handset to speakerphone:
PERCEPTION e
ex
&