Outgoing Calls; Station-To-Station Calling - Toshiba Perception e&ex User Manual

PERCEPTION e
ex
&
To Make an Outgoing Call:
1. Lift the handset.
2. Dial the required trunk access
code.
3. Dial the desired telephone
number.
To Call Another Station:
1. Obtain dial tone in one of the
following ways:
a. Lift the handset.
... or ...
b. Lift the handset and press
a DN button.
... or ...
c. For on-hook dialing, press
a DN button.
2. Dial the station's number.
3. Hang up when the call is
completed.
announce through the DKT speaker of another station that is currently
busy.

OUTGOING CALLS

VOICE
You will hear dial tone.
Trunk Access Codes:
You will hear outside dial tone.

STATION-TO-STATION CALLING

VOICE
If your primary DN line is idle, then it will automatically be selected.
Dial tone will be heard via the speaker. It is not necessary to lift the
handset unless you wish to use it.
You will hear the call progress tones.
DIGITAL TELEPHONE
17