Toshiba Perception e&ex User Manual page 13

PERCEPTION e
ex
&
To Activate Automatic Callback:
1. Press the ACB button, or press
the CONF/TRNS button and
dial the access code (*
_____.
2. Hang up and wait for the
callback, or dial another call.
To Answer Automatic Callback:
1. When the desired connection
becomes idle, your telephone
will signal once.
2. You must pick up the call
within six seconds.
3. Lift the handset or press the
prime DN button.
4A. If the called party is a trunk:
5A. Proceed to dial.
4B. If the called party is a station:
5B. Hang up and wait to be called
again.
To Cancel Automatic Callback:
1. Press the ACB button or dial
the acccess code (* *
_____.
You will hear recall dial tone, and the ACB LED (if equipped) will light.
7)
The ACB LED (if equipped) and the DN LED will flash.
If you do not, your request will be canceled. (This time period is
programmable.)
You will hear outside dial tone.
NOTE: If the call was made using Least Cost Routing, then, at this point,
the called number will be dialed automatically.
The called station will ring, and you will hear ringback tone. If you hear
overflow tone, this indicates that another station had already either
camped onto, registered an Automatic Callback, or placed a call to that
station before you.
The ACB LED (if equipped) will go out, and the callback will be canceled.
7)
DIGITAL TELEPHONE
7