Miscellaneous Features; Account Code Calls - Toshiba Perception e&ex User Manual

PERCEPTION e
ex
&
3. Make your announcement.
To Record a Forced, or a Forced
and Verifiable Account Code
(Direct Trunk Access or Least
Cost Routing):
1. Access a CO line (by dialing
the DTA or LCR access code).
2. Dial the distant directory
number.
3. Using the dialpad, dial the
1- ~ 12-digit account code
(determined in the DMDR
Program).
To Record a Verifiable Account
Code Before Dialing a Call:
1. Lift the handset.
2. Press the CRG button.
Your announcement will be made.
NOTE: If the paged person is either busy on another DN or has SCO
engaged, you will hear ring tone until the call is answered. If that DN is
busy, you will hear busy tone.

MISCELLANEOUS FEATURES

ACCOUNT CODE CALLS

On some calls, for accurate billing purposes, you may be required
(forced) to dial an account code before dialing an outside number. On
other calls, you may wish to record an account number voluntarily after
either dialing an outside number, or receiving an incoming call. The code
you enter will be recorded on the Station Message Detail Recording
(SMDR) printout with the details of your call. Be sure that the Account
Code Length (ACL) is programmed in DMDR. This feature will not
operate without it.
You will hear dial tone.
You will hear recall dial tone.
The account code is saved to output to SMDR. The system stores dialed
directory number to auto-dial queue, and the trunk call is made.
NOTE: These Forced and Forced/Verifiable Account Codes can be
applicable to either all calls or toll calls only (Programming Option).
You will hear dial tone.
DIGITAL TELEPHONE
27