Toshiba Perception e&ex User Manual page 34

DIGITAL TELEPHONE
3. Dial the 1- ~ 12-digit account
code on the dialpad.
4. Dial the direct trunk access
code and the desired
telephone number.
To Record a Verifiable Account
Code During a Call (Incoming or
Outgoing) With a CRG Button:
1. Ask your party to wait.
2. Press the CRG button.
3. Dial the 1- ~ 12-digit account
code.
4. Resume the conversation.
To Record a Verifiable Account
Code During a Call (Incoming or
Outgoing) Without a CRG
Button:
1. Ask your party to wait, then
press the CONF/TRNS
2. Dial the access code (#
_____.
3. Dial the 1- ~ 12-digit account
code.
4. Resume your conversation.
To Record a Verifiable Account
Code After a Call Is Completed:
28
You will hear recall dial tone.
The trunk call is made.
At any time during conversation ...
You will hear recall dial tone. The connection will be placed on hold, the
DN LED indicates the On-hold status, and the CRG LED will light.
The system will store the account code to output to SMDR, and the call
will automatically be reconnected.
At any time before disconnect ...
You will hear recall dial tone.
button.
9)
Your connection will be placed on hold, and you will hear recall dial tone.
The system will store the account code to output to SMDR.
This procedure applies when a station user forgets to input an account
code either before, or during a call. The account code can still be entered
after the call is completed, provided it is done prior to disconnecting the
trunk.
After the call is completed and prior to the station user hanging up, the
PERCEPTION e
ex
&