Table of Contents
Advertisement
DIGITAL TELEPHONE
4. Dial the number to be stored
(16 digits maximum).
5. Press the
SDC
button.
6. Record the Speed Dial-Station
address code and telephone
number for future reference.
To Use Speed Dial-System:
1. Lift the handset.
2. Press the
SDS
button or dial
the access code
(#
6) _____.
3. Dial the Speed Dial-System
address code (10 ~ 99).
To Store or Change a Telephone
Number:
1. Notify the attendant.
6
NOTE: It may be necessary to insert a pause to allow for dial tone delay.
To enter a pause, press the
The SDC LED will go out, and the number will be stored.
SPEED DIAL-SYSTEM
As many as 90 telephone numbers can be stored in the Speed Dial-
System directory.
You will hear dial tone.
The SDS LED will flash.
The system will dial the stored number.
(The Speed Dial-System directory is controlled by the attendant console.)
NOTE: In a consoleless operation, the Speed Dial-System is set and
changed via the programming terminal (TTY connection).
CALL FUNCTIONS
AUTOMATIC CALLBACK
If you attempt to call another station or access a trunk and receive a busy
tone, you can request to be signaled when the desired station or trunk is
idle. You may continue to use your telephone in the usual manner while
awaiting a callback.
*
button after the trunk access code.
PERCEPTION e
ex
&
Advertisement
Table of Contents
