Messaging; Mini Messaging; Voice Mail; Receive A Voice Mail - ASCOM d41 DECT User Manual

User Manual
Ascom d41 DECT Handset
7

Messaging

7.1

Mini Messaging

Note: This feature is applicable for d41 Advanced only.
The handset d41 Advanced can receive text messages with a maximum of 12 characters.
When a text message is received, the LED starts flashing and the message alert signal
sounds. The message is displayed in a dialog window.
If the received message contains more than 12 characters, the remaining characters are
discarded. Only the last received message is displayed. For example, a first message is
received and displayed in the dialog window. Another message is received and will be
displayed instead of the prior message, which will be discarded.
Press "Close" when the message has been read. It is not possible to reply to a message or
create/send a new message. The message(s) are not stored in the phone.
7.2

Voice Mail

7.2.1

Receive a Voice Mail

When a new voice mail is received, the message alert signal sounds, and the voice mail
icon
a dialog window.
7.2.2

Check the Voice Mail inbox

Check the voice mail(s) by pressing "Call" from the dialog window. If "Close" is selected,
it is possible to dial the Voice Mail by a long press on digit key "1" when in standby mode.
Follow the given instruction in the Voice Mail.
Note: In case the following message is shown: "Voice mail number not defined", the
voice mail number needs to be configured to the voice mail button. Contact your system
administrator.
21 June 2012 / Ver. G
is displayed in the status bar. The new voice mail notification is also displayed in
TD 92582EN
27