Call Back; Call Waiting; Answering A Second Call During A Call; Dtmf - ASCOM d41 DECT User Manual

User Manual
Ascom d41 DECT Handset
2 Select "Conference call"
3 Press "Select".
The person initiating the conference call is the conference leader, and the other are
participant members of the conference call.

6.3.10 Call Back

When a call is made to a busy handset, it is possible to automatically call back when the
busy handset is free. When a busy tone louds, do as follows:
1 Press the "More" soft key during the call.
2 Select "Call back"
3 Press "Select".
4 Press
5 When the handset alerts, press

6.3.11 Call Waiting

During a call when the line is busy, do as follows:
1 Press the "More" soft key.
2 Select "Call waiting"
3 Press "Select". The other part will get a "Call waiting" signal.
When the line is free it will automatically call the number again. This is system dependent.

6.3.12 Answering a second call during a call

If a second caller calls during a phone call, the handset will beep and display the text
"Incoming call" and the name or phone number of the second caller. To answer the
second caller:
1 Press the soft key Accept.
The text "Switch" briefly appears on screen, and the handset transfers to the
second call. The first call is put on hold.
2 When finished speaking with the first caller, select the More soft key.
3 Select End Call.
The second call is closed and the first call is retrieved.
Note: It is possible to reject a second call by pressing the Decline soft button instead of the
Accept button. The second caller will hear a busy tone, and the call will be logged as a
rejected call in the handset.

6.3.13 DTMF

Some systems/PBXs require that the handset sends Dual Tone Multi Frequency (DTMF)
when pressing the keys. DTMF can be enabled as follows:
1 Press the "More" soft key during the call.
2 Select "DTMF".
3 Press "Select". This will enable the use of DTMF signals.
1. Only visible if defined in PDM.
21 June 2012 / Ver. G
1
.
1
.
and wait until the handset alerts.
1
.
and the call will automatically be started.
TD 92582EN
25