Contacts; Call Contact - ASCOM d41 DECT User Manual

User Manual
Ascom d41 DECT Handset
3 Enter number (maximum 24 digits) to divert to, or press
phonebook.
4 Press "OK".
The handset sends a diversion reason code
will automatically be disconnected after a few seconds.
To stop diversion, select No reply > Deactivate, and confirm by pressing "OK".
Divert Calls When Busy
1 Select "When busy".
2 Select "Activate" and press "OK".
3 Enter number (maximum 24 digits) to divert to, or press
phonebook.
4 Press "OK".
The handset sends a diversion reason code
will automatically be disconnected after a few seconds.
To stop diversion, select When busy > Deactivate, and confirm by pressing "OK".
9.2

Contacts

1 Enter the menu by pressing the "Menu" soft key.
2 Select
9.2.1

Call Contact

Note: Is it also possible to access Call contact by pressing the soft key
mode.
1 Select "Call contact".
2 Select contact from the list, or enter name or number in the search field.
3 Press
It is also possible to edit the contact by selecting "View" > "More". Note that it is not
possible to edit a company phonebook contact. The company contacts are indicated by a
"Locked entry" icon
Add Contact
1 Select "Add contact".
Add New Contact
1 Select "New".
2 Select "Add", and enter the name of the contact, see
page 13.
3 Press "OK".
4 Select "Work number", "Mobile number", or "Other number".
5 Press "Add".
1.The code is defined when configuring the absence/diversion reason in the PDM/IMS3
21 June 2012 / Ver. G
in the menu.
, or "Call".
in front of the name.
1
to the system by establishing a call. The call
1
to the system by establishing a call. The call
3.4.8 Alphanumeric Keys
TD 92582EN
to access the
to access the
in idle
on
32