Preparing A Power Source; Inserting Batteries - Sony PCM-D100 Operating Instructions Manual

Preparing a power source

Inserting batteries

Use the supplied LR6 (size AA) alkaline
batteries.
1
Slide the battery cover lock lever to
"RELEASE" to release the lock and
open the battery compartment cover
on the rear of the recorder.
2
Pull out the battery case from the
recorder.
20
First slide the cover
downward and
then open it.
Push the buttons on both sides of the
battery case to pull it out.
3
Insert four LR6 (size AA) alkaline
batteries into the battery case.
Be sure to insert the batteries with the

and ends in the right position.
4
Insert the battery case back into
the recorder, and close the battery
compartment cover.
Notes
Turn off the power of the recorder before taking out
ˎ ˎ
the battery case.
Make sure to insert the battery case and close
ˎ ˎ
the battery compartment cover firmly, so that the
battery cover lock lever is switched to "LOCK" to lock
the cover.
Battery case
