Sony PCM-D100 Operating Instructions Manual page 22

Preparing a power source (continued)
To operate with an AC adaptor (not
supplied)
Connect an AC adaptor (not supplied) to the
DC IN 6V jack.
Connect to a
wall outlet
AC adaptor
Connect to
the DC IN
6V jack
Note on an AC adaptor
You can use an AC adaptor
that supports:
Output voltage: DC6V
ˎ ˎ
Output current: 800mA
ˎ ˎ
or more
Note
When "Please wait" appears on the display or the
ˎ ˎ
ACCESS indicator flashes, the recorder is accessing
memory. During this time, do not remove batteries
and do not disconnect the connected AC adaptor
(not supplied), or do not disconnect or connect the
USB cable. Doing so may damage the data.
22
Polarity of the plug