Sony PCM-D100 Operating Instructions Manual page 27

Notes
If a memory card is not recognized, remove it and
ˎ ˎ
then insert it into the linear PCM recorder again.
Do not insert or remove the memory card during
ˎ ˎ
recording/playback/formatting. Doing so may cause
a malfunction of the recorder.
If you use a memory card formatted with other
ˎ ˎ
device than the linear PCM recorder, you cannot
record files properly. Make sure to use a memory
card formatted with the linear PCM recorder.
If you format a memory card containing recorded
ˎ ˎ
data, the recorded data will be deleted. Be careful
not to delete important data.
The recorder is accessing memory while "Please
ˎ ˎ
wait" appears on the display or the ACCESS indicator
flashes. During this time, do not remove the
memory card. Doing so may damage the data.
The recorder does not support parallel data transfer.
ˎ ˎ
You cannot use a ROM (read-only-memory) type or
ˎ ˎ
write-protected memory card.
Data may be damaged on the following occasions:
ˎ ˎ
The memory card is removed or the recorder is
ˋ ˎ
turned off during a read or write operation.
The memory card is used in a location subject to
ˋ ˎ
static electricity or electrical noises.
Do not insert any liquid, metal, flammable or any
ˎ ˎ
object other than a memory card into the memory
card slot. Doing so may cause fire, electric shock, or
malfunctions.
Do not leave a memory card within the reach of
ˎ ˎ
small children. They might accidentally swallow it.
We assume no responsibility for any loss or damage
ˎ ˎ
of recorded data.
We recommend that you save a backup of any
ˎ ˎ
important data.
When you use a memory card without a write-
ˎ ˎ
protect setting, make sure not to edit or delete data
by accident.
Do not touch the terminal of a memory card with
ˎ ˎ
your hand or a metal object.
Do not strike, bend or drop a memory card.
ˎ ˎ
Do not disassemble or modify a memory card.
ˎ ˎ
Do not expose a memory card to water.
ˎ ˎ
Do not use a memory card under the following
ˎ ˎ
conditions:
Locations beyond the required operating
ˋ ˎ
conditions, including locations, such as the hot
interior of a car parked in the sun and/or in the
summer, the outdoors exposed to direct sunlight,
or a place near a heater.
Humid locations or locations with corrosive
ˋ ˎ
substances present.
When using a memory card, make sure to check the
ˎ ˎ
correct insertion direction into the memory card slot.
MagicGate is the collective name of content
ˎ ˎ
protection technologies developed by Sony.
The linear PCM recorder does not support data
recording/playback that requires MagicGate
functions.
27