Preventing Unintentional Operations (Hold) - Sony PCM-D100 Operating Instructions Manual

Preventing unintentional operations (HOLD)

You can disable all the buttons (HOLD) in order
to prevent unintentional operations when you
carry the linear PCM recorder, etc.
To disable the button operations
Slide the HOLD switch to "ON" to disable the
buttons while the power is on.
32
"HOLD" appears for approximately 3 seconds,
indicating that all the button operations are
disabled.
Releasing the HOLD function
If you operate buttons on the linear PCM
recorder when the HOLD function is set,
"HOLD. Slide HOLD switch to activate." appears
on the display.
To release the HOLD function, slide the HOLD
switch to "OFF."