Remote Operation; Display Overview; Listen For The "Beep - Travis Industries 430 GSR2 Owner's Manual

Remote Operation

When the switch on the battery holder is set to "REMOTE" the transmitter operates the fireplace. Once
you understand how the transmitter works, you will be able to operate your fireplace quickly and easily.

Display Overview

The transmitter display has four main sections (see Figure 5).
Thermostat Display
ON

Listen for the "Beep"

Each time you press a button on the transmitter that controls the fireplace, a "beep" will sound from the
IFC. When you change thermostat target settings the IFC will not beep.
NOTE: When the batteries start to get low, the IFC will beep twice whenever a button is pressed. When
the batteries are nearly depleted, the IFC will no longer beep. See "IFC Batteries" on page 37).
© Travis Industries
Operation
Room Temperature Display
F
Read-Out (Thermostat Setting, Function, etc.)
Mode Display (Flame, Blower, Light, Comfort Control)
Figure 5
4140811
33
100-01340