Csg Specifications - AMX SIP Communications Gateway CSG-500 Operation/Reference Manual

CSG SIP Communications Gateway

CSG Specifications

The following table lists the specifications for the CSG.
CSG Specifications
Dimensions (HWD):
Weight:
Enclosure
Power Requirements
Memory
Certifications
Operating/Storage
Environment
Front Panel Components:
Power LED
Network LED
IP Phones LEDs
Analog LEDs
Rear Panel Components:
Power connector
Configuration Reset Switch
Console port
Network port
IP Phones ports
Analog ports
Compatible Devices
Included Accessories
Other AMX Equipment
2
1.74" x 11.45" x 5.44" (4.41 cm x 29.09 cm x 13.82 cm)
2.25 lbs (1.02 kg)
Metal with black matte finish
Constant current draw: 2.6 A @ 12 VDC
• 8MB on board serial Flash memory
• 64MB 16-bit parallel SDRAM
FCC (Class A), CE, IEC60950, and RoHS
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 5% to 85% RH Non-Condensing
• Storage Temperature: -20° C (-4° F) to 70° C (158° F)
• Storage Humidity: 0% to 85% RH Non-Condensing
Indicates whether the unit is turned on and receiving power.
Indicates whether a network cable is connected and the speed of the network.
Indicates whether the corresponding link is connected and the speed of the
link.
Indicates whether the analog port is installed and the type of port (FXO/FXS)
installed. (Not available on all models.)
5.1mm OD, 2.1mm pin, 12V 3.0A center positive
Resets the current configuration to the factory default when pressed
continuously during the boot process.
1 RJ45 port for console (craft) port serial control
1 RJ45 10/100baseT port for a general (WAN) connection
4 RJ45 10/100baseT ports for IP phone connections
• 8 RJ11 ports: 4 for FXO and 4 for FXS connections (CSG-544 only)
• 8 RJ11 ports for FXO connections (CSG-580 only)
Note: The CSG-500 does not use analog ports.
• MVP-8400i
• NXD-500i
• NXD-700Vi
• NXD-1000Vi
• MVP-5200i
• MET-ECOM Metreau Entry Communicator
• PSN3.0 Power Supply, 3.0A, 12.0VDC (FG423-31)
• CSG SIP Communications Gateway Installation Guide (93-2182-01)
• 2 Surface mounting brackets (62-2182-04)
• 4 #4-40 X .250 PPH screws (80-0112)
• DIN Rail Mounting Bracket (FG532-06)
CSG SIP Communications Gateway Operation/Reference Guide